back to case studies 
Difficult Pumping Applications from
Blackhawk Environmental Company
Pumps Down To 700 Feet
BLACKHAWK ENVIRONMENTAL COMPANY’S Anchor Pump®
is specially designed to lift liquid from depths exceeding
700 feet deep. It is ideal for pumping hot, dirty, silty,
slimy materials...particularly oil, leachate and landfill
gas condensate. Unlike other pumps, where discharge performances
are limited to the inlet air pressure, the Anchor Pump is
designed to pump to the lowest possible level and can be installed
in wells as small as 2" in diameter.
The Anchor Pump is a plunger pump, with a reciprocation action,
that mechanically recovers fluid from the well bottom, independent
of the well’s liquid level, while maintaining a constant
flow recovery rate. It features a top head drive mechanical
oil well type sucker rod that effectively recovers all types
of viscous liquids. Its smooth controlled flow recovery has
the ability to tune the rate of the recovery to the yield
of the formation being pumped; preventing premature silting
or degradation of the recovery well.
The Anchor Pump’s deep recovery capabilities can produce
400 psi of pressure. Anchor Pump can be set for a flow range
of 0 to 11 US GPM. Anchor Piston Pumps feature top head mechanical-drive
mechanisms and uncomplicated controls, making installation
and on-site maintenance easy - even under the toughest conditions.
The unit can be powered pneumatically, electrically or by
windmill.
Blackhawk Environmental Company provides pumping solutions
for the environmental, landfill, groundwater and industrial
markets. Blackhawk specializes in manufacturing quality pumps
and controls for demanding pumping applications.
Download PDF
(52KB)
back to case studies
 |
To
view these files, you will need the free Adobe Acrobat
Reader program. If you do not have this program, you
can
download it from here. |
|
