back to press releases 
Glen Ellyn, IL - BLACKHAWK ENVIRONMENTAL COMPANY
announces that their Anchor ® Pump 101E, electrically
operated positive displacement piston jack pump with a top
head drive motor, has been used successfully for low flow
bottom intake recovery at abandoned refinery sites.
For groundwater remediation at closed refinery sites, the
Anchor Pump 101E's powerful suction pulls liquid into the
pump with every stroke and draws liquid to the bottom of the
well. The pump operates consistently whether pumping action
is clean or dirty. The positive displacement action resists
slowdown or stoppage in sticky and oily applications. The
pump can be operated and communicated with from a remote location.
As the Anchor Pump 101E's electric drive mechanism is positioned
at the top of the well, it can be easily viewed during operation
and is not affected by environment of the well. In addition,
electric lines are not introduced into the well. The pump
is capable of removing water and product such as oil, solvent,
leachate, and condensate, from a well casing of two (2) inch
diameter or greater to depths of 280 feet. Since the fluid
inlet is located at the bottom of the pump intake cylinder,
it can remove water or product to 0 submergence depth. The
Anchor Pump 101E has a pump capacity of 0-1.2 gpm.
In addition to groundwater remediation, the Anchor Pump 101E
is ideal for a wide variety of pumping applications including
landfill leachate pumping from vertical or sump wells, landfill
leachate pumping from horizontal sump or well, landfill methane
gas condensate sump dewatering, landfill methane gas well
dewatering, groundwater recovery and tank and sump dewatering.
For more information,
please contact BLACKHAWK ENVIRONMENTAL COMPANY
21W161 Hill Avenue, Glen Ellyn, IL 60137. Phone: 630-469-4916.
Fax: 630-469-4896.
Or email us.
For more
information about this pump and other Blackhawk Environmental
quality pumping and control products, call today
630-469-4916. |
back to press releases
|
