back to press releases 
Programmable Logic Controller makes it easy for operator to
set system pressure and flow rate parameters
Glen Ellyn, IL - BLACKHAWK ENVIRONMENTAL COMPANY introduces
their electrically operated positive piston displacement Anchor
Pump with PLC (Programmable Logic Controller) for hazardous
and non-hazardous landfill areas. The Programmable Logic Controller
can be programmed for run time, liquid level, stroke count,
system pressure and flow rate parameters.
The Electric Anchor Pump with PLC is ideal for a wide variety
of hazardous and potentially hazardous landfill pumping applications
such as: recovering leachate from vertical or horizontal sumps/wells,
methane condensate sump and gas well dewatering, groundwater
remediation/recovery and tank/sump dewatering.
The Electric Anchor Pump with PLC, a reciprocating action
plunger pump, mechanically recovers fluid from the well bottom,
independent of the well's liquid level, while maintaining
a constant flow recovery rate. The Electric Anchor Pump with
PLC reaches to the lowest possible level and can be installed
in wells as small as 2" in diameter.
The Electric Anchor Pump with PLC's electric power and power
lines are located outside of the well and do not enter into
the well or sump. Zero electric wires are in well or sump.
The pump drive mechanism is positioned on top of the wellhead
and can be easily viewed during operation.
Electric Anchor Pump with PLC can be installed vertically
or horizontally and is manufactured in a range of sizes and
designs depending on the degree of application difficulty.
For over ten years, the Black hawk Anchor Pump has been successfully
operating in landfills across the United States.
Black hawk Environmental Co. has been providing pumping solutions
for the industrial, environmental, landfill and groundwater
markets. Black hawk specializes in manufacturing quality pumps
and controls for demanding pumping applications.
For more information,
please contact BLACKHAWK ENVIRONMENTAL COMPANY
21W161 Hill Avenue, Glen Ellyn, IL 60137. Phone: 630-469-4916.
Fax: 630-469-4896.
Or email us.
For more
information about this pump and other Blackhawk Environmental
quality pumping and control products, call today
630-469-4916. |
back to press releases
|
